Regulator Body - Our simple rugged design utilizes the same time proven technology found in typical regulators used by SCUBA Divers around the world.  Our always-on, breathe on demand, balanced single stage regulator is easy to use, maintain and service. HEED 3 can be used in any orientation, even upside down.

Pressure Indicator - Standard on the HEED 3, The Dial Gauge Pressure Indicator is easy to read and shows an accurate measurement of tank pressure in 200 psi increments.

Purge Button - Clears the regulator and empties the Air Tank.

Mouthpiece - Standard regulator mouthpiece carried by SCUBA Diving Shops everywhere and is the same model used on most regulators.

Check Valve - Remove the cap and attach the Air Compressor adaptor to fill the HEED 3 in about 60 seconds (depending upon compressor). Or attach the optional SCUBA Tank Refill Adapter and connect the other end to a filled 3000psi SCUBA tank. Slowly open the tank valve and in 30-60 seconds, your HEED 3 is full. More information is available in HEED 3 - Refilling.

3000 PSI Aluminum Tank - This SCUBA tank is manufactured just like standard SCUBA tanks, with the same safety features.  The cylinder should be hydrostatically tested once every 5 years.